The benefits of installation cannot be overstated protective grill (kenguryatnik), as it can help prevent serious damage to your vehicle in a collision. Because sometimes you can’t avoid a collision, it’s critical to know how to protect yourself when it happens.

Preparation and necessary tools

To successfully install a guard, you will need a variety of tools, including:

• Ratchet and hand wrenches;
• Screwdrivers;
• Penetrating lubricants;
• Drill;
• Electric drill;
• Portable saw or grinder with cutting wheel;
• Grinding machine.

estimated time

Installing a radiator grille on your car will take 30 to 60 minutes. But to make the installation process quick and easy, follow the below steps exactly.

Step #1: Install the Bottom Bracket

The first step to installing the bottom bracket is to locate the pre-drilled holes in the car frame. The holes also serve as hooks for towing vehicles from the front. After locating the hooks, the next step is to unscrew and loosen them using a penetrating solvent. On some vehicles, you can insert black plastic filler plugs into the holes. And to remove the plugs from the holes, you will need a flathead screwdriver. Also, if there are additional bolt-on plates on the skid plate, you should attach the bottom bracket to the plates rather than to your vehicle’s frame.

Note: The installation of the lower brackets depends on the type of vehicle and its design.

Step #2: Cut a through hole in the bumper

The next step involves properly installing the grille in the center of the bumper. And for this you will need an assistant, since you are unlikely to cope here alone. First, determine the center position of the grille on the bottom bracket and mark it. Next, cut off the marked portion of the bumper using a portable saw, surface grinder, or cut-off wheel. Place the bumper on the bottom bracket to see if it fits and reshape it until it fits correctly.

Step #3: Attaching the Top Mounting Bracket

The brackets are installed below the bumper level or between the openings of the front grille protection. If the end of the bracket does not fit into the grille slot, it should be secured behind the grille slot. This step is only required for those installing a full-width kenguryat.

Additionally, some vehicles may not be designed so that the brackets fit through the grille slot. In this case, you can temporarily remove the grille. While in other cars, the pre-drilled holes are located on the radiator position or behind the grille. The brackets must be secured through pre-drilled holes. Once the bottom and top brackets are properly secured, make sure they are all properly aligned and centered. Finally, tighten all the bolts and nuts.

Step #4: Install the winch and guard

Some bars are similar to bull bars that contain trays solely for mounting a winch. When faced with this, secure the winch support tray to the vehicle frame. This process is similar to screwing on a protective grille. The first step is to install the bottom bracket and attach the tray to it. Then properly attach the top brackets and tighten them.

Step #5: Move the License Plate

This step occurs when the grille obscures the license plate in front. And you will need to buy a relocator bracket. After purchasing the relocator bracket, attach the license plate holder to the bottom of the relocator. In some cases, you may need to replace the original license plate with a new bracket. Then place the new bracket behind the grille and install the base onto the guard. And make sure the rods are below the arms of the bracket. The last step is to place the license plate on the visible tabs.

Strong arguments in favor of installing a dog guard on your car

There are different reasons why you might want to install a guard on your car and they include:

Debris protection

While the vehicle is moving, materials such as rocks and other objects thrown at you can impact the vehicle and cause damage to its body. The protective grille protects the truck from colliding with debris on the road.

Protects your car from accidents with animals

The kenguryatnik perfectly protects the car from impact when hitting animals. But despite this protection, larger animals like moose can still cause damage to your vehicle.
Pairs perfectly with other car accessories.

The protective grille can also serve as a canvas for mounting other accessories, such as LED panels or fog lights. Despite the fact that this will not interfere with the operation of the tow hooks.
It gives your car a brutal and menacing look. It also serves as a personal visualization of your car, because you can design it the way you like. You can even choose materials and colors to suit your taste.

Conclusion

The risk of getting into an accident while driving is quite high. Thus, using a guard helps protect your vehicle from damage and prevents unnecessary repair costs.

Since the safety of your car is a top priority, you must decide for yourself whether you want to provide yourself with even more protection or not. If you still decide to install a guard, then carefully follow the steps described above and then you can avoid at least some of the damage to the body of your car.